Share

IIR document

Effects of biofouling on air-side heat transfer and pressure drop for finned tube heat exchangers.

Author(s) : PU H., DING G. L., MA X. K., et al.

Type of article: Article, IJR article

Summary

Experimental investigations on the effects of biofouling on air-side heat transfer and pressure drop for three biofouled finned tube heat exchangers and one clean finned tube heat exchanger were performed. Artificial accelerated method of microorganism growth on the fin surface was used for simulating the biofouled finned tube heat exchangers. Experimental results indicate that the effects of biofouling on the air-side heat transfer coefficient decreases 7.2% at 2.0 m/s when the biofouled area ratio is 10%, while it decreases 15.9% at 2.0 m/s when the biofouled area ratio is 60%, and biofouling causes a 21.8 to about 41.3% increase in pressure drop when the air velocity is between 0.5 and 2.0 m/s. The increase of inlet air velocity is helpful to improve the long-term performance of finned tube heat exchanger. Biofouling makes the hydrophilic coating failure, and the condensation water easily converges on the fin surface where biofouling grows.

Available documents

Format PDF

Pages: 1032-1040

Available

  • Public price

    20 €

  • Member price*

    Free

* Best rate depending on membership category (see the detailed benefits of individual and corporate memberships).

Details

  • Original title: Effects of biofouling on air-side heat transfer and pressure drop for finned tube heat exchangers.
  • Record ID : 2009-1510
  • Languages: English
  • Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 32 - n. 5
  • Publication date: 2009/08

Links


See other articles in this issue (38)
See the source

Indexing