Summary
Inner wall surface wettability could affect ejector performances, however, no-slip wall boundary conditions were mostly assumed in CO2 ejector simulation studies. In this study, we introduced velocity slip boundary condition into the 3D heterogeneous mixture model for a two-phase CO2 ejector, by using different apparent contact angle at the inner wall of mixing chamber, motive nozzle or diffuser. Numerical simulation results show that the inner wall wettability of mixing chamber and diffuser affects flow and mass transfer in a CO2 ejector significantly, while the inner wall wettability of motive nozzle affects ejector performances very slightly. As apparent contact angle increases from 5° to 175°, resulting in the change of slip condition from negative slip to no-slip then to positive slip, velocity in mixing chamber increases, pressure in mixing chamber decreases, expansion angle after motive nozzle outlet decreases, thus backflow vortices become smaller then disappear. This leads to an increase in suction mass flow rate, and entrainment ratio can be enhanced over 15 %. Correlations between entrainment ratio and apparent contact angle at the wall of different parts in ejector were developed. As the wall wettability changes from hydrophilic to superhydrophobic, the variation trends of ejector performances are similar under different operating conditions with motive nozzle inlet in the supercritical, near-critical, and subcritical regions. This study is helpful to understand flow mechanisms inside the CO2 ejector with different wall wettability, and provides a new approach to improve the performances of a two-phase CO2 ejector by changing wall surface wettability.
Available documents
Format PDF
Pages: 267-286
Available
Public price
20 €
Member price*
Free
* Best rate depending on membership category (see the detailed benefits of individual and corporate memberships).
Details
- Original title: Numerical study on effects of wettability on performances of CO2 ejector.
- Record ID : 30033559
- Languages: English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 171
- Publication date: 2025/03
- DOI: http://dx.doi.org/10.1016/j.ijrefrig.2025.01.015
Links
See other articles in this issue (20)
See the source
Indexing
-
Themes:
Ejector systems, air cycle, Stirling cycle, other cycles);
CO2 - Keywords: Ejector; Two-phase flow; CO2; Wettability; Nozzle; Simulation
-
Study of a novel inlet geometry for ejectors.
- Author(s) : BAUZVAND A., TAVOUSSI E., NOGHREHABADI A., BEHBAHANI-NEJAD M.
- Date : 2022/07
- Languages : English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 139
- Formats : PDF
View record
-
Numerical investigation of a two-phase CO2 ejec...
- Author(s) : LUCAS C., RUSCHE H., SCHROEDER A., et al.
- Date : 2014/07
- Languages : English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 43
- Formats : PDF
View record
-
Shock waves in supersonic two-phase flow of CO2...
- Author(s) : BERANA M. S., NAKAGAWA M., HARADA A.
- Date : 2009/11
- Languages : English
- Source: HVAC&R Research - vol. 15 - n. 6
View record
-
Experimental investigation on the effect of mix...
- Author(s) : NAKAGAWA M., MARASIGAN A. R., MATSUKAWA T., et al.
- Date : 2011/11
- Languages : English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 34 - n. 7
- Formats : PDF
View record
-
Review of recent developments in advanced eject...
- Author(s) : ELBEL S., LAWRENCE N.
- Date : 2016/02
- Languages : English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 62
- Formats : PDF
View record