Share

Performance evaluation of a lithium-chloride absorption refrigeration and an assessment of its suitability for biomass waste heat.

Author(s) : OBERWEIS S., AL-SHEMMERI T.

Type of article: Article

Summary

This paper presents a computer model that will evaluate the performance of a thermo-chemical accumulator. The model is based on operational data such as temperatures and flow rates. The ultimate goal for this model is to estimate the coefficient of performance (COP) of this unit when run on hot water from biomass combustion as the heat source. The outputs of the model are verified by comparing the simulation of the actual machine with published experimental data. The computed results for cooling COP are within 10% of the measured data. The simulations are all run for heat load temperatures varying between 80 and 110°C. As expected, simulation results showed an increase in COP with increased heat source temperatures. The results demonstrate that the potential of combined solar and biomass combustion as a heat source for absorption cooling/heating in climates with low solar radiation can be coupled with biomass waste.

Details

  • Original title: Performance evaluation of a lithium-chloride absorption refrigeration and an assessment of its suitability for biomass waste heat.
  • Record ID : 30007779
  • Languages: English
  • Source: Applied Sciences - n. 4
  • Publishers: MDPI
  • Publication date: 2012/10
  • DOI: http://dx.doi.org/10.3390/app2040709

Links


See the source

Indexing