IIR document
Experimental study and modelling of heat transfer during condensation of pure fluid and binary mixture on a bundle of horizontal finned tubes.
Author(s) : BELGHAZI M., BONTEMPS A., MARVILLET C.
Type of article: Article, IJR article
Summary
An experimental investigation was conducted to measure the local heat transfer coefficient for each row in a trapezoidal finned horizontal tube bundle during condensation of both pure fluid (HFC 134a) and several compositions of the non-azeotropic binary mixture HFC 23/HFC 134a. The test section is a 13×3 (rows × columns) tube bundle and the heat transfer coefficient is measured using the modified Wilson plot method. The inlet vapour temperature is fixed at 40 °C and the water flow rate in each active row ranges from 170 to 600 l/h. The test series cover five different finned tubes all commercially available, K11 (11 fins/inch), K19 (19 fins/inch), K26 (26 fins/inch), K32 (32 fins/inch), K40 (40 fins/inch) and their performances were compared. The experimental results were checked against available models predicting the heat transfer coefficient during condensation of pure fluids on banks of finned tubes. Modelling of heat exchange during condensation of binary mixtures on bundles of finned tubes based on the curve condensation model is presented.
Available documents
Format PDF
Pages: 214-223
Available
Public price
20 €
Member price*
Free
* Best rate depending on membership category (see the detailed benefits of individual and corporate memberships).
Details
- Original title: Experimental study and modelling of heat transfer during condensation of pure fluid and binary mixture on a bundle of horizontal finned tubes.
- Record ID : 2003-1715
- Languages: English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 26 - n. 2
- Publication date: 2003/03
Links
See other articles in this issue (10)
See the source
Indexing
- Themes: Mass transfer
- Keywords: Heat transfer coefficient; Finned tube; Measurement; Mass transfer; Heat transfer; Modelling; Binary mixture; Bundle; Refrigerant; Condensation
-
Effect of fin geometry on condensation of downw...
- Author(s) : HONDA H., TAKAMATSU H., TAKATA N.
- Date : 1998/11/17
- Languages : English
- Source: Heat transfer in condensation and evaporation: application to industrial and environmental processes. Preprints of the EUROTHERM Seminar 62.
View record
-
Film-wise condensation of a pure fluid and a bi...
- Author(s) : BELGHAZI M., BONTEMPS A., MARVILLET C.
- Date : 2002/07
- Languages : English
View record
-
Prediction of condensation heat transfer coeffi...
- Author(s) : MURATA K., HASHIZUME K.
- Date : 1992
- Languages : English
- Source: Exp. Heat Transf. - vol. 5 - n. 2
View record
-
Condensation heat transfer of a pure fluid and ...
- Author(s) : SIGNE J. C., BONTEMPS A., MARVILLET C.
- Date : 1998/11/17
- Languages : English
- Source: Heat transfer in condensation and evaporation: application to industrial and environmental processes. Preprints of the EUROTHERM Seminar 62.
View record
-
Condensation of refrigerant on banks of smooth ...
- Author(s) : BRIGGS A., BUI H. H., ROSE J. W.
- Date : 1999/09/19
- Languages : English
- Source: 20th International Congress of Refrigeration: Refrigeration into the Third Millennium.
- Formats : PDF
View record