Share

Material compatibility of 3D printed polymer composites with low GWP refrigerants.

Number: 2414

Author(s) : LI K., SMITH T., MOTTA S. Y., ZHANG M., NASKAR A., NAWAZ K.

Summary

The recent development of 3D printing brings numerous opportunities to develop polymer heat exchangers with desired configurations and allows access to the new complex engineering design for better performance. To be used in the HVAC&R system, the compatibility of these materials to refrigerants needs to be thoroughly investigated and understood. This study tested the material compatibility of the printed polymer composites according to the ASHRAE Guideline 38 using metal pressure vessels. These printed parts were tested with R-134A, R-1234YF, R-1234ZE, R-1233ZD(E), and 32-3 MAF POE (10 wt.%) was used as the lubricants. The change in volume, mass, hardness, and mechanical properties was studied in detail. Different compatibility of the composites with refrigerants was observed when the composition of the composite changed. After exposure to refrigerants, the morphological and thermal properties were studied with the scanning electron microscope, thermogravimetric analysis, and differential scanning calorimetry to further reveal the influence of these refrigerants.

Available documents

Format PDF

Pages: 8 p.

Available

Free

Download

Details

  • Original title: Material compatibility of 3D printed polymer composites with low GWP refrigerants.
  • Record ID : 30030718
  • Languages: English
  • Subject: Technology
  • Source: 2022 Purdue Conferences. 19th International Refrigeration and Air-Conditioning Conference at Purdue.
  • Publication date: 2022

Links


See other articles from the proceedings (224)
See the conference proceedings

Indexing