Portable mold sensors: technical feasibility and operational requirements. Final report.
Author(s) : Georgia Tech Research Institute, JESÚS V. R. de, BALASUBRAMANIAN G., BAYER C. W., et al.
Type of monograph: Report
Summary
This report was prepared as an account of work sponsored by ARTI under its HVAC&R Research for the 21st Century Program. This investigation has included the development of two laboratory systems to sense a change in the dielectric constant, caused by a change in moisture, on the back of wallboard and also within the wallboard itself.
Details
- Original title: Portable mold sensors: technical feasibility and operational requirements. Final report.
- Record ID : 2009-1846
- Languages: English
- Publication: ARTI (Air-Conditioning and Refrigeration Technology Institute) - United states/United states
- Publication date: 2006/03
- Source: Source: ARTI-21CR-612-40080-03; 69 p.; fig.; photogr.; ref.
Indexing
- Themes: Other air-conditioning equipment
- Keywords: Sensor; Mould; Measurement; Research; Wall; Humidity; Expérimentation; USA; Testing
-
Hygrothermal performance analysis of wind barri...
- Author(s) : OJANEN T., KOHONEN R. O.
- Date : 1995/01
- Languages : English
- Source: ASHRAE Transactions.
View record
-
Moisture, building enclosures, and mould.
- Author(s) : LSTIBUREK J.
- Date : 2002/01
- Languages : English
- Source: HPAC Engineering - vol. 74 - n. 1
View record
-
Water condensation promotes fungal growth in ve...
- Author(s) : PASANEN P., et al.
- Date : 1993/06
- Languages : English
- Source: Indoor Air - vol. 3 - n. 2
View record
-
Moisture, building enclosures, and mould.
- Author(s) : LSTIBUREK J.
- Date : 2001/12
- Languages : English
- Source: HPAC Engineering - vol. 73 - n. 12
View record
-
The transient response of capacitive thin-film ...
- Author(s) : DOOLEY J. B., O'NEAL D. L.
- Date : 2008/09
- Languages : English
- Source: HVAC&R Research - vol. 14 - n. 5
View record