IIR document

R1234ze(E) flow boiling heat transfer and pressure drop inside a 2.4 mm microfin tube.

Number: pap. n. 549

Author(s) : DIANI A., MANCIN S., CAVALLINI A., et al.

Summary

There are two possible viable factors to cope with the new environmental regulations: more efficient heat exchangers and environmental-friendly refrigerants. This paper explores the use of the new low-GWP refrigerant R1234ze(E) during flow boiling inside a mini microfin tube, which has an inner diameter at the fin tip of 2.4 mm, thus it is a downsizing of the traditional microfin tubes. In the experimental tests, the mass flux was varied between 375 and 940 kg m-2 s-1, the heat flux from 10 to 50 kW m-2, and the vapour quality from 0.1 to 1. The saturation temperature at the inlet of the test section was kept constant and equal to 30°C. The results show the promising capabilities of both the mini microfin tube and the new low-GWP refrigerant, which can be used as an efficient alternative to the more common R134a.

Available documents

Format PDF

Pages: 8 p.

Available

  • Public price

    20 €

  • Member price*

    Free

* Best rate depending on membership category (see the detailed benefits of individual and corporate memberships).

Details

  • Original title: R1234ze(E) flow boiling heat transfer and pressure drop inside a 2.4 mm microfin tube.
  • Record ID : 30016053
  • Languages: English
  • Source: Proceedings of the 24th IIR International Congress of Refrigeration: Yokohama, Japan, August 16-22, 2015.
  • Publication date: 2015/08/16
  • DOI: http://dx.doi.org/10.18462/iir.icr.2015.0549

Links


See other articles from the proceedings (657)
See the conference proceedings