Share

Compression effects on pressure loss in flexible HVAC ducts.

Author(s) : ABUSHAKRA B., WALKER I. S., SHERMAN M. H.

Type of article: Article

Summary

A study was conducted to evaluate the effect of compression on pressure drop in flexible, spiral wire helix core ducts used in residential and light commercial applications. Ducts of 6, 8, and 10 in. (150, 200, and 250 mm) nominal diameters were tested under different compression configurations following ANSI/ASHRAE Standard 120-1999, Methods of Testing to Determine Flow Resistance of HVAC Air Ducts and Fittings. The results showed that the available published references tend to underestimate the effects of compression. The study demonstrated that moderate compression in flexible ducts, typical of that often seen in field installations, could increase the pressure drop by a factor of four, while further compression could increase the pressure drop by factors close to ten. The results proved that the pressure drop correction factor for compressed ducts cannot be independent of the duct size, as suggested by ASHRAE Fundamentals; therefore, a new relationship was developed for better quantification of the pressure drop in flexible ducts. This study also suggests potential improvements to ASHRAE Standard 120-1999 and provides new data for duct design.

Details

  • Original title: Compression effects on pressure loss in flexible HVAC ducts.
  • Record ID : 2004-2947
  • Languages: English
  • Source: HVAC&R Research - vol. 10 - n. 3
  • Publication date: 2004/07
  • Document available for consultation in the library of the IIR headquarters only.

Links


See other articles in this issue (7)
See the source

Indexing