Design optimization of rib-roughened channel to enhance turbulent heat transfer.

Author(s) : KIM H. M., KIM K. Y.

Type of article: Article

Summary

This article presents a numerical procedure to optimize the shape of a two-dimensional channel with periodic ribs mounted on both of the walls to enhance turbulent heat transfer. The response surface method is used as an optimization technique with Reynolds-averaged Navier-Stokes analysis of flow and heat transfer. A standard k-e turbulence model was used as a turbulence closure. Computational results for the overall heat transfer rate show good agreements with experimental data. The width-to-height ratio of the rib, rib height-to-channel height ratio, pitch-to-rib height ratio and distance between opposite ribs to rib pitch ratio are chosen as design variables. The objective function was defined as a linear combination of heat-transfer and friction-loss related terms with weighting factor. D-optimal design was used to reduce the data points, and, with only 36 points, reliable response surface was obtained. Optimum shapes of the channel were obtained in the range from 0.0 to 0.1 of weighting factor. In the weighting factor range where the designer's goal is shifted to reduction of pressure loss, both of pitch-to-rib height ratio and distance between opposite ribs to rib pitch ratio reach almost constant values.

Details

  • Original title: Design optimization of rib-roughened channel to enhance turbulent heat transfer.
  • Record ID : 2005-1164
  • Languages: English
  • Source: International Journal of Heat and Mass Transfer - vol. 47 - n. 23
  • Publication date: 2004/11

Links


See other articles in this issue (8)
See the source