Share

IIR document

Effects of vapor injection techniques on the heating performance of a CO2 heat pump at low ambient temperatures.

Author(s) : BAEK C., HEO J., JUNG J., et al.

Type of article: Article, IJR article

Summary

The objective of this study is to investigate the effects of vapor injection techniques on the heating performance of a CO2 heat pump. The performances of the flash tank vapor injection (FTVI), sub-cooler vapor injection (SCVI) and FTVI with a suction line heat exchanger (FTSX) cycles were measured and analyzed with variations of the outdoor temperature, compressor frequency, and injection mass flow rate. At the outdoor temperature of -15°C and compressor frequency of 55 Hz, the heating capacity and COP of the optimized SCVI cycle were 12.1% and 12.7% higher than those of the optimized FTVI cycle, respectively, because the total mass flow rate in the SCVI cycle was higher than that in the FTVI cycle by the large temperature and pressure differences in the sub-cooler of the SCVI cycle. In addition, the optimum injection flow rate ratios in the vapor injection CO2 cycles yielding the maximum COP were determined at various compressor frequencies.

Available documents

Format PDF

Pages: 26-35

Available

  • Public price

    20 €

  • Member price*

    Free

* Best rate depending on membership category (see the detailed benefits of individual and corporate memberships).

Details

  • Original title: Effects of vapor injection techniques on the heating performance of a CO2 heat pump at low ambient temperatures.
  • Record ID : 30011639
  • Languages: English
  • Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 43
  • Publication date: 2014/07

Links


See other articles in this issue (17)
See the source

Indexing