Summary
The prerequisite for the exploration and exploitation of natural gas hydrate (NGH) is ensuring that the hydrate sample does not decompose during the sampling process. In order to solve this problem, the hole-bottom freezing sampling technique (HBFS) method was proposed, which uses a cold-alcohol to reduce the temperature of the hydrate sample and prevent its decomposition. However, the low heat exchange between the cold-alcohol and the hydrate sample results in a large loss of energy, and the sample cannot be frozen to the required temperature due to the size limitations of the sampler. In this study, three different heat transfer modes were used to increase the energy efficiency, namely heat conduction (cold-alcohol), phase change heat transfer (liquid nitrogen), phase change convection (alcohol-dry ice mixture). The test results show that the freezing efficiency of the alcohol and dry-ice mixture is 11.38%, which is the highest. The alcohol-dry ice mixture can cool the average temperature of the sample from approximately -17.81 to -23.37 °C, in which the hydrate sample does not decompose rapidly under normal pressure. The alcohol–dry ice mixture is more suitable as a coolant for the HBFS.
Available documents
Format PDF
Pages: 221-236
Available
Public price
20 €
Member price*
Free
* Best rate depending on membership category (see the detailed benefits of individual and corporate memberships).
Details
- Original title: Experimental investigation of coolant selection and energy efficiency analysis during gas hydrate-bearing sediment freeze-sampling.
- Record ID : 30027855
- Languages: English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 120
- Publication date: 2020/12
- DOI: http://dx.doi.org/10.1016/j.ijrefrig.2020.07.027
- Document available for consultation in the library of the IIR headquarters only.
Links
See other articles in this issue (42)
See the source
Indexing
-
Themes:
Heat transfer;
Other industrial applications - Keywords: Hydrate; Gas; Liquid; Energy efficiency; Sampling; Freezing; Heat transfer; Expérimentation
-
Water cooled minichannel heat sinks for micropr...
- Author(s) : JAJJA S. A., ALI W., ALI H. M., ALI A. M.
- Date : 2014/03
- Languages : English
- Source: Applied Thermal Engineering - vol. 64 - n. 1-2
View record
-
Convective performance of nanofluids in commerc...
- Author(s) : ROBERTS N. A., WALKER D. G.
- Date : 2010/11
- Languages : English
- Source: Applied Thermal Engineering - vol. 30 - n. 16
View record
-
Experimental assessment of the aero-thermal per...
- Author(s) : ARMELLINI A., CASARSA L., MUCIGNAT C.
- Date : 2013/09
- Languages : English
- Source: Applied Thermal Engineering - vol. 58 - n. 1-2
View record
-
Loop thermosiphon as a feasible cooling method ...
- Author(s) : LI T., JIANG Y., LI Z., et al.
- Date : 2016/10/25
- Languages : English
- Source: Applied Thermal Engineering - vol. 109, part A
View record
-
Energy saving in ceramic tile kilns: cooling ga...
- Author(s) : MEZQUITA A., BOIX J., MONFORT E., et al.
- Date : 2014/04
- Languages : English
- Source: Applied Thermal Engineering - vol. 65 - n. 1-2
View record