IIR document
Experimental study of the influence of the inside surface characteristics on the carbon dioxide flow boiling heat transfer coefficient in a horizontal tube.
Author(s) : HASHIMOTO K., KIYOTANI A., SASAKI N.
Summary
The CO2 heat pump water heater "ECO CUTE", which was commercialized in 2001, has a significant potential for energy conservation and greenhouse abatement. Shipments in fiscal 2007 expanded to 413 000 units. In order to encourage the broader use of "ECO CUTE", there is a need to develop a more compact and higher efficiency heat pump unit. The key element of the apparatus is always the evaporator. CRIEPI and Sumitomo Light Metal, Ltd. have studied CO2 flow boiling heat transfer coefficient experimentally. In the previous report, mean heat flux was understood as being equivalent to mass velocity in significantly affecting the mean evaporating heat transfer coefficient (99.999% purity, without oil) in a horizontal smooth tube (outer diameter 6 mm, thickness 0.4 mm). In this report, the heat transfer coefficient and pressure drop of a smooth tube and 3 kinds of grooved tubes are measured. The test conditions are: CO2 mass velocity from about 160 to about 660 kg/(m2s) (heat flux from about 10 to about 40 kW/m2), pressures of CO2 3.5, 4.0 and 4.5 MPa (saturation temperatures of 0, 5 and 10°C, respectively), tube lengths of 3.0 and 4.0 m, quality at the inlet of the test section of 0.17 and CO2 super heat at the outlet of test section of 5 K. Consequently, it is understood that the heat transfer coefficient of grooved tubes is higher than that of the smooth tube and in the higher mass velocity region, the heat transfer coefficient does not go below 400 kg/m2.s. The difference in the heat transfer coefficient caused by the groove features is not clear.
Available documents
Format PDF
Pages: 2008-2
Available
Public price
20 €
Member price*
Free
* Best rate depending on membership category (see the detailed benefits of individual and corporate memberships).
Details
- Original title: Experimental study of the influence of the inside surface characteristics on the carbon dioxide flow boiling heat transfer coefficient in a horizontal tube.
- Record ID : 2009-0073
- Languages: English
- Source: 8th IIR-Gustav Lorentzen Conference on Natural Working Fluids (GL2008)
- Publication date: 2008/09/07
Links
See other articles from the proceedings (132)
See the conference proceedings
Indexing
-
Themes:
Heat transfer;
CO2 - Keywords: Horizontal tube; Comparison; Microfin tube; Measurement; Heat transfer; Bare pipe; Heat pump; Expérimentation; Evaporator; Boiling; CO2; Pressure drop
-
Heat transfer and pressure drop during evaporat...
- Author(s) : COLOMBO L., MUZZIO A., NIRO A.
- Date : 2005/08/02
- Languages : English
- Source: Commercial Refrigeration. Thermophysical Properties and Transfer Processes of Refrigerants. Proceedings of the IIR International Conferences.
- Formats : PDF
View record
-
Experimental investigation for flow boiling of ...
- Author(s) : KOYAMA S., ITO D., LEE S. M., et al.
- Date : 2005/08/02
- Languages : English
- Source: Commercial Refrigeration. Thermophysical Properties and Transfer Processes of Refrigerants. Proceedings of the IIR International Conferences.
- Formats : PDF
View record
-
CO2 and R-410A flow boiling heat transfer and p...
- Author(s) : PARK C. Y., HRNJAK P. S.
- Date : 2006/07/17
- Languages : English
- Source: 2006 Purdue Conferences. 18th International Compressor Engineering Conference at Purdue & 11th International Refrigeration and Air-Conditioning Conference at Purdue [CD-ROM].
- Formats : PDF
View record
-
Strömungsverdampfung von CO2 in glatten und inn...
- Author(s) : SCHAEL A. E., KIND M.
- Date : 2006/01
- Languages : German
- Source: KI Luft Kältetech. - vol. 42 - n. 1-2
View record
-
Boiling heat transfer of HFO-1234yf flowing in ...
- Author(s) : SAITOH S., DANG C., NAKAMURA Y., et al.
- Date : 2011/12
- Languages : English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 34 - n. 8
- Formats : PDF
View record