Summary
Compared with the traditional building envelope, the thermal mass of building envelope integrated with phase change material was increased greatly, which would reduce the building energy consumption, improve thermal comfort, and shift the peak electricity load. Due to latent heat energy storage when phase changing, the wall integrated with PCM can release heat storage or cold storage to maintain the indoor thermal environment for a period of time after closing the air conditioning. This work presents the results of an experimental study of thermal performances of wall integrated with PCM and without PCM when the air condition runs continuously and intermittently. A building with these two kinds of walls is chosen and the inner surface temperature and heat flow are measured. The building have a domestic heat pump as a cooling system. The results show that the PCM can reduce the inner surface temperature 1°C, and reduce the inner surface heat flow about 40% when the air condition runs continuously. When the air condition runs intermittently by the working schedule, the PCM can also reduce the inner surface temperature 1°C, and the cold storage releasing time of wall integrated with PCM is 2 hours longer than wall without PCM. The PCM can improved the thermal performance of building envelop significantly.
Available documents
Format PDF
Pages: 6 p.
Available
Public price
20 €
Member price*
15 €
* Best rate depending on membership category (see the detailed benefits of individual and corporate memberships).
Details
- Original title: Experimental study on thermal performance improvement of envelop integrated with phase change material in air-conditioned room.
- Record ID : 30019221
- Languages: English
- Subject: Environment
- Source: 2016 Purdue Conferences. 4th International High Performance Buildings Conference at Purdue.
- Publication date: 2016/07/11
Links
See other articles from the proceedings (77)
See the conference proceedings
Indexing
-
Themes:
Heat transfer;
Green buildings - Keywords: Thermal conductivity; Building; Performance; PCM; Wall; Optimization; Insulation
-
Comparison and validation of modelling methods ...
- Author(s) : CONLEY B., BALDWIN C., CRUICKSHANK C. A., et al.
- Date : 2016/07/11
- Languages : English
- Source: 2016 Purdue Conferences. 4th International High Performance Buildings Conference at Purdue.
- Formats : PDF
View record
-
Omotac zgrade. Kljucni parametar za održive zgr...
- Author(s) : KYRIAKI E., GIAMA E., PAPADOPOULOS A. M.
- Date : 2016/12
- Languages : English
- Source: 47th International HVAC&R Congress and Exhibition.
- Formats : PDF
View record
-
Analytical analysis of the thermal performance ...
- Author(s) : CHENG R., ZHANG Y., WANG X.
- Date : 2013/06/16
- Languages : English
- Source: Clima 2013. 11th REHVA World Congress and 8th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings.
- Formats : PDF
View record
-
Optimum R-values of building walls under differ...
- Author(s) : SANEA S. A. al-, ZEDAN M. F., MUJAHID A. M. al-, et al.
- Date : 2016/03/05
- Languages : English
- Source: Applied Thermal Engineering - vol. 96
View record
-
Optimum insulation thickness of external walls ...
- Author(s) : ÇOMAKLI K., YÜKSEL B.
- Date : 2003/03
- Languages : English
- Source: Applied Thermal Engineering - vol. 23 - n. 4
View record