Share

IIR document

Flow boiling heat transfer of carbon dioxide inside a small-sized microfin tube.

Author(s) : DANG C., HARAGUCHI N., HIHARA E.

Type of article: Article, IJR article

Summary

This study investigates the flow boiling heat transfer of carbon dioxide inside a small-sized microfin tube (mean inner diameter: 2.0 mm; helix angle: 6.3°) at a saturation temperature of 15°C, and heat and mass flux ranges of 4.5-18 kW/m2 and 360-720 kg/m2.s, respectively. Although, experimental results indicated that heat flux has a significant effect on the heat transfer coefficient, the coefficient does not always increase with mass flux, as in the case of conventional refrigerants such as HFCs or HCFCs. Under certain conditions, the heat transfer coefficient at a high mass flux was lower than that at a lower mass flux, indicating that convective heat transfer had a suppression effect on nucleate boiling. The heat transfer coefficients in the microfin tubes were 1.92.3 times the values in smooth tubes of the same diameter under the same experimental conditions, and the dryout quality was much higher, ranging from 0.9 to 0.95. The experimental results indicated that using microfin tubes may considerably increase the overall heat transfer performance.

Available documents

Format PDF

Pages: pp. 655-663

Available

  • Public price

    20 €

  • Member price*

    Free

* Best rate depending on membership category (see the detailed benefits of individual and corporate memberships).

Details

  • Original title: Flow boiling heat transfer of carbon dioxide inside a small-sized microfin tube.
  • Record ID : 2010-0401
  • Languages: English
  • Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 33 - n. 4
  • Publication date: 2010/06

Links


See other articles in this issue (23)
See the source

Indexing