Search results

IIR document

Heat transfer characteristics of PCM slurry using super-hydrophobic gel particles under laminar flow.

• Author(s) : OTSUBO T., MIYATA N., IWAYA M., ENDO M., NISHIO N., HIDEMA R., SUZUKI H.
• Publication date: 2022/06
• Languages : English
• Keywords : Heat transfer, PCM, Expérimentation, Calculation, Thermodynamic property, Laminar flow, Particle, Prandtl
• Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 138
• Formats : PDF

Numerical study of laminar flow and heat transfer in microchannel heat sink with offset ribs on sidewalls.

• Author(s) : CHAI L., XIA G. D., WANG H. S.
• Publication date: 2016/01/05
• Languages : English
• Keywords : Microchannel, Heat transfer, Simulation, Laminar flow, Heat exchanger, Pressure drop
• Source: Applied Thermal Engineering - vol. 92

The effects of element direction and intersection angle of adjacent Q-type inserts on the laminar flow and heat transfer.

• Author(s) : YU Y., WANG H., SONG M., et al.
• Publication date: 2016/02/05
• Languages : English
• Keywords : Tube, Heat transfer, Reynolds, Simulation, Performance, Laminar flow
• Source: Applied Thermal Engineering - vol. 94

IIR document

Experimental study of heat transfer of ice slurry based on MPG in laminar flows.

• Author(s) : MELLARI S.
• Publication date: 2021/09/01
• Languages : English
• Keywords : Expérimentation, Heat transfer, Ice slurry, Laminar flow, Nusselt, Evaporator, Heat exchanger, Rheological property, Calculation, Modelling, Glycol
• Source: 13^rd IIR Conference on Phase-Change Materials and Slurries for Refrigeration and Air Conditioning. Proceedings: (online) Vicenza, Italy, September 1-3, 2021.
• Formats : PDF

IIR document

Heat transfer coefficients during laminar flow of microencapsulated PCM fluid.

• Author(s) : BIALKO B., NALEPA B., HALON T., ZAJACZKOWSKI B.
• Publication date: 2023/08/21
• Languages : English
• Keywords : PCM, Heat transfer coefficient, Thermal conductivity, Encapsulation, Expérimentation, Flow rate
• Source: Proceedings of the 26^th IIR International Congress of Refrigeration: Paris , France, August 21-25, 2023.
• Formats : PDF

IIR document

Evaluation of single phase heat transfer characteristics inside multiport minichannel.

• Author(s) : CHIEN N. B., CHOI K. I., OH J. T., et al.
• Publication date: 2015/08/16
• Languages : English
• Keywords : Friction, Heat transfer, Aluminium, Expérimentation, Laminar flow
• Source: Proceedings of the 24th IIR International Congress of Refrigeration: Yokohama, Japan, August 16-22, 2015.
• Formats : PDF

IIR document

Experimental study on flow characteristics of ice slurry through a T-junction Part I: Laminar flow.

• Author(s) : KUMANO H., KOBAYASHI T., MAKINO Y., MORIMOTO T., ASAOKA T.
• Publication date: 2020/08
• Languages : English
• Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 116
• Formats : PDF

CFD simulation of heat transfer enhancement of Al2O3/water and Al2O3/ethylene glycol nanofluids in a car radiator.

• Author(s) : DELAVARI V., HASHEMABADI S. H.
• Publication date: 2014/12
• Languages : English
• Keywords : Ethylene glycol, CFD, Tube, Heat transfer, Alumina, Simulation, Turbulent flow, Laminar flow, Water
• Source: Applied Thermal Engineering - vol. 73 - n. 1

Enhanced Convective Heat Transfer Using Titania-dispersed Nanofluids.

• Author(s) : KRISTIAWAN B., KAMAL S., SUHANAN, et al.
• Publication date: 2017/08/07
• Languages : English
• Keywords : Thermal conductivity, Heat transfer, Performance, Nanofluid, Expérimentation, Turbulent flow, Laminar flow, Heat exchanger
• Source: International sorption heat pump conference, ISHPC 2017, Tokyo august 7-10.

Gas infrared radiative properties and effects on thermal fluid dynamics.

• Author(s) : TRABELSI S., LAKHAL W., SEDIKI E.
• Publication date: 2016/03/24
• Languages : English
• Keywords : Radiation, Hydrodynamics, Heat transfer, Duct, Laminar flow, Convection, Water, CO2
• Source: 1st International Refrigeration, Energy and Environment Colloquium. Proceedings: Hammamet, Tunisia, March 24-27, 2016.
• Formats : PDF

Forced convection in twisted minichannel (TMC) with different cross section shapes: a numerical study.

• Author(s) : KHOSHVAGHT-ALIABADI M., ARANI-LAHTARI Z.
• Publication date: 2016/01/25
• Languages : English
• Keywords : Working fluid, Channel, Heat transfer, Simulation, Laminar flow, Forced convection
• Source: Applied Thermal Engineering - vol. 93

IIR document

Analytical solution for combined heat and mass transfer in laminar falling film absorption with uniform film velocity: isothermal and adiabatic wall.

• Author(s) : MEYER T.
• Publication date: 2014/12
• Languages : English
• Keywords : Mass transfer, Heat transfer, Absorption, Wall, Falling film, Laminar flow
• Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 48
• Formats : PDF

Analytical solution for combined heat and mass transfer in laminar falling film absorption using first type boundary conditions at the interface.

• Author(s) : MEYER T., ZIEGLER F.
• Publication date: 2014/06
• Languages : English
• Keywords : Calculation, Mass transfer, Heat transfer, Absorption, Falling film, Laminar flow
• Source: International Journal of Heat and Mass Transfer - vol. 73

Laminar thermal performance of microchannel heat sinks with constructal vertical Y-shaped bifurcation plates.

• Author(s) : LI Y., ZHANG F., SUNDEN B., et al.
• Publication date: 2014/12
• Languages : English
• Keywords : CFD, Microchannel, Heat transfer, Simulation, Vertical plate, Laminar flow, Pressure drop
• Source: Applied Thermal Engineering - vol. 73 - n. 1

Comparison of various methods for evaluation of combined heat and mass transfer in laminar falling films with constant film velocity. 2. Analytical methods.

• Author(s) : MEYER T., MITTERMAIER M., ZIEGLER F.
• Publication date: 2014/03/02
• Languages : English
• Keywords : Comparison, Mass transfer, Heat transfer, Absorption, Model, Falling film, Laminar flow
• Source: International sorption heat pump conference (ISHPC2014), College Park, United States, March 31-April 2, 2014.
• Formats : PDF

Aerosol-free coooling tower

Climespace, a subsidiary of Suez and Gaz de France that has developed Paris' ice water cooling system, has successfully tested a new system of aero-cooling towers, which eliminates aerosols, a major factor in the spread of legionella bacteria in...

• Publication date : 2006/07/26

LNG trade in 2013

Preliminary figures show that 2013 was, like 2012, a year of stagnation in terms of LNG trade growth.

• Publication date : 2014/02/06

The benefits of linear compressors

Three articles published recently in the IJR illustrate the strength of R&D work around linear compressors and highlight the benefits of these, especially in commercial and domestic...

• Publication date : 2020/02/27

Evaporative cooling without adding humidity

Scientists at the University of Harvard have designed a prototype evaporative cooling system called Cold-SNAP that effectively cools air at low cost for both dry and humid climates.

• Publication date : 2020/05/26
• Subjects: Developing country, Technology

The benefits of 3D printing in refrigeration and air conditioning

The various applications of 3D printing in the field of refrigeration and air conditioning highlight possible tremendous advantages in terms of energy efficiency and cost minimisation.

• Publication date : 2020/05/27
• Subjects: Technology

New design for the IJR but still quality papers!

As well as original research papers the IJR also includes review articles, papers presented at IIR conferences, short reports and letters describing preliminary results and experimental details, and letters to the Editor on recent areas of...

• Publication date : 2019/11/20

Additive manufacturing of regenerators for caloric cooling

In many areas of engineering, additive manufacturing allows the production of complex and multifunctional products that could not be manufactured using traditional methods. In the...

• Last update : 2022/09/16
• Langues : English, French
• Themes : Caloric cooling (magnetocaloric, electrocaloric, elastocaloric and barocaloric cooling)

Additive manufacturing of heat exchangers

In the refrigeration industry, additive manufacturing (colloquially referred to as “3D printing”) makes it possible to fabricate novel, complex and potentially more energy efficient...

• Last update : 2022/09/07
• Langues : English, French
• Themes : Evaporators, condensers and other heat exchangers