R32 partial condensation inside a brazed plate heat exchanger.

Number: pap. 2367



It is well known that when a superheated gas reaches a cold surface, the condensation starts immediately only if the wall temperature is lower than the dew temperature of the refrigerant; in this case, the heat transfer phenomenon can be also affected by the superheating temperature. This paper presents the experimental measurements of the heat transfer coefficient carried out during partial condensation of superheated R32 refrigerant in a commercial brazed plate heat exchanger prototype. The present work aims at highlighting the effects of the superheating during the partial condensation of R32 by imposing 5, 10, 15, and 25 K of vapour superheating at the inlet of the brazed plate heat exchanger prototype. The experimental measurements were carried out by varying the specific mass velocity between 15 and 40 kg/m2.s and the outlet vapour quality between 0.0 and 0.65. The experimental data were collected at around 36.5°C saturation temperature (saturation pressure of 2.27 MPa). The present data is used to validate a new step-by-step model for the calculation of the heat transfer coefficient, which accounts for the different superheating inlet temperatures.

Available documents

Format PDF

Pages: 10 p.


  • Public price

    20 €

  • Member price*

    15 €

* Best rate depending on membership category (see the detailed benefits of individual and corporate memberships).


  • Original title: R32 partial condensation inside a brazed plate heat exchanger.
  • Record ID : 30006321
  • Languages: English
  • Source: 2012 Purdue Conferences. 14th International Refrigeration and Air-Conditioning Conference at Purdue.
  • Publication date: 2012/07/16


See other articles from the proceedings (195)
See the conference proceedings