Share

Comparison study of bio-growth in commercial AHU’s using copper heat exchangers and components.

Number: pap. 2476

Author(s) : HIPCHEN J., HOGAN A., POWELL D.

Summary

The growth of molds and other bio-organisms on heat exchangers in commercial air handling units (AHU’s) can reduce air flow thereby affecting the efficiency of the HVAC system and potentially affecting air quality, as well. This growth is especially prevalent on the moist surfaces of cooling coils. The use of ultraviolet germicidal irradiation (UVGI) to control bio-growth on heat exchange coils in commercial AHU’s has become a common practice with documented positive results. Although the use of UVGI is effective on those surfaces that receive sufficient doses of radiation, concerns about surfaces outside of the radiation field plus concerns about energy costs and maintenance issues related to UVGI equipment has led to a search for new methods and materials that are more effective and less costly in reducing bio-fouling of heat exchange coils over the life of an AHU. The antimicrobial properties of copper are well documented (Weaver et al, 2010). After rigorous testing under approved protocols, over 500 copper alloys were registered by the US Environment Protection Agency (EPA) as antimicrobial agents for touch surfaces. For copper alloys used in HVAC applications, the EPA granted a “Treated Article Exemption” registration allowing registered manufacturers of copper HVAC components to make product protection claims of suppressed growth of bacteria, mold and mildew that can reduce system efficiency, and cause product deterioration and foul odors. The study presented in this paper was designed to observe a side-by-side comparison of copper alloy heat exchangers to conventional copper-tube/aluminum-fin heat exchangers. At a school in New Jersey, one of 7 rooftop AHU’s was fitted with hydronic and chilled water heat exchangers fabricated from all copper tubes and copper fins. The copper heat exchangers included copper brackets and drip pans. This AHU with copper coils and components was compared to 2 equally sized AHU’s with copper tubes, aluminum fins, aluminum brackets and aluminum drip pans. One of the aluminum-fin AHU’s was equipped with UVGI and one was not. Bio-growth sampling involved swabs from the surfaces of fins on both the supply-side and discharge-side of the coils. Swabs were also taken on the surfaces of drip pans. Data points covered a full heating and cooling season. The data in this paper shows that all-copper coils revealed dramatically less bio-growth than coils with aluminum fins and aluminum bracketry, including the AHU equipped with UVGI. These data support continued studies that quantify the economic impact of all-copper heat exchangers and total cost of ownership (TCO) related to AHU’s without UVGI.

Available documents

Format PDF

Pages: 8

Available

  • Public price

    20 €

  • Member price*

    15 €

* Best rate depending on membership category (see the detailed benefits of individual and corporate memberships).

Details

  • Original title: Comparison study of bio-growth in commercial AHU’s using copper heat exchangers and components.
  • Record ID : 30024573
  • Languages: English
  • Source: 2018 Purdue Conferences. 17th International Refrigeration and Air-Conditioning Conference at Purdue.
  • Publication date: 2018/07/09

Links


See other articles from the proceedings (252)
See the conference proceedings

Indexing