Share

Heat transfer enhancement and pressure drop characteristics of TiO2-water nanofluid in a double-tube counterflow heat exchanger.

Author(s) : DUANGTHONGSUK W., WONGWISES S.

Type of article: Article

Summary

This article reports an experimental study on the forced convective heat transfer and flow characteristics of a nanofluid consisting of water and 0.2 vol.% TiO(2) nanoparticles. The heat transfer coefficient and friction factor of the TiO(2)-water nanofluid flowing in a horizontal double-tube counter flow heat exchanger under turbulent flow conditions are investigated. The Degussa P25 TiO(2) nanoparticles of about 21 nm diameter are used in the present study. The results show that the convective heat transfer coefficient of nanofluid is slightly higher than that of the base liquid by about 6-11%. The heat transfer coefficient of the nanofluid increases with an increase in the mass flow rate of the hot water and nanofluid, and increases with a decrease in the nanofluid temperature, and the temperature of the heating fluid has no significant effect on the heat transfer coefficient of the nanofluid. It is also seen that the Gnielinski equation failed to predict the heat transfer coefficient of the nanofluid. Finally, the use of the nanofluid has a little penalty in pressure drop. [Reprinted with permission from Elsevier. Copyright, 2009].

Details

  • Original title: Heat transfer enhancement and pressure drop characteristics of TiO2-water nanofluid in a double-tube counterflow heat exchanger.
  • Record ID : 2009-1955
  • Languages: English
  • Source: International Journal of Heat and Mass Transfer - vol. 52 - n. 7-8
  • Publication date: 2009/03
  • DOI: http://dx.doi.org/10.1016/j.ijheatmasstransfer.2008.10.023

Links


See other articles in this issue (4)
See the source

Indexing