Share

Effect of hydro-thermal behavior on the frost heave of a saturated silty clay under different applied pressures.

Author(s) : ZHANG X., ZHANG M., LU J., et al.

Type of article: Article

Summary

Civil engineering buildings are often damaged by frost heave of ground soils in cold regions. The hydro-thermal behavior is a key factor in determining frost heave of soils during freezing process. Moreover, the frost heave is also strongly affected by overburden pressure and external water source. Here, a series of one-directional freezing experiments with a water supply under different applied pressures were carried out to study the effect of hydro-thermal behavior on the frost heave of a saturated silty clay. Four different pressures were applied on the top of each soil sample, respectively, i.e. 50, 150, 300 and 500 kPa. The experimental results indicate that the frost heave of the supplied water is the main component of the total deformation for each soil sample with a water supply. However, the increased applied pressure can restrict water migration, and reduce frost heave during soil freezing process. Furthermore, for the saturated silty clay under different applied pressures, only when the advance rate of the freezing front drops to a critical value, the water intake begins. The start time of the water intake is also delayed with the increased applied pressure. Besides, the shut-off pressure of the saturated silty clay, at which no water flow into or out of the soil sample, is obtained based on the relationship between the critical advance rate of freezing front and the applied pressure.

Details

  • Original title: Effect of hydro-thermal behavior on the frost heave of a saturated silty clay under different applied pressures.
  • Record ID : 30021280
  • Languages: English
  • Source: Applied Thermal Engineering - vol. 117
  • Publication date: 2017/05/05
  • DOI: http://dx.doi.org/10.1016/j.applthermaleng.2017.02.069

Links


See other articles in this issue (17)
See the source

Indexing