IIR document
Entropic optimization of the economizer's pressure in a heat pump cycle integrated with a flash-tank and vapor-injection system.
Author(s) : AMIRI RAD A., MADDAH S.
Type of article: Article, IJR article
Summary
The heat pump cycles with the vapor injection improve the efficiency coefficient by reducing the work of the compressor. Despite the extensive literature on this topic, there are many challenges in determining the optimized condition of the pressure of the economizer. In the current study, a heat pump cycle integrated with a vapor injection system and an economizer was optimized using the entropic analysis. The findings were also compared with optimization based on the energy analysis. A thermodynamic model based on the mass balance, energy, and entropy was offered for various refrigerants, including R125, R134A, R404A, R410A, and R507A. Furthermore, the Economize's Optimum Pressure (EOP) was determined based on the minimum entropy generation and the maximum coefficient of performance in different conditions. Based on the obtained findings, a dimensionless coefficient (a) was finally defined for the economizer's pressure. It was revealed that the optimum value of (a) in a wide range of conditions was in a range from 0.25 to 0.35.
Available documents
Format PDF
Pages: 56-66
Available
Public price
20 €
Member price*
Free
* Best rate depending on membership category (see the detailed benefits of individual and corporate memberships).
Details
- Original title: Entropic optimization of the economizer's pressure in a heat pump cycle integrated with a flash-tank and vapor-injection system.
- Record ID : 30025347
- Languages: English
- Subject: HFCs alternatives
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 97
- Publication date: 2019/01
- DOI: http://dx.doi.org/10.1016/j.ijrefrig.2018.09.018
Links
See other articles in this issue (18)
See the source
Indexing
-
Themes:
Heat pumps techniques;
HFCs;
Blends - Keywords: Vapour; Thermodynamic property; Heat pump; Modelling; Pressure; Injection; HFC; Entropy; Economizer; COP
-
Low GWP refrigerants R1234ze(E) and R1234ze(Z) ...
- Author(s) : FUKUDA S., KONDOU C., TAKATA N., et al.
- Date : 2014/04
- Languages : English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 40
- Formats : PDF
View record
-
DERIVED THERMODYNAMIC DESIGN DATA FOR HEAT PUMP...
- Author(s) : ZYLLA R.
- Date : 1981
- Languages : English
- Source: J. Heat Recov. Syst. - vol. 1 - n. 2
View record
-
DERIVED THERMODYNAMIC DATA FOR HEAT PUMP SYSTEM...
- Author(s) : ZYLLA R.
- Date : 1981
- Languages : English
- Source: J. Heat Recov. Syst. - vol. 1 - n. 2
View record
-
Heating performance comparison of R410A and its...
- Author(s) : CHEN X., YANG J., LIU C., et al.
- Date : 2018/12
- Languages : English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 96
- Formats : PDF
View record
-
Optimization of a transcritical CO2 heat pump c...
- Author(s) : SARKAR J., BHATTACHARYYA S., GOPAL M. R.
- Date : 2004/12
- Languages : English
- Source: International Journal of Refrigeration - Revue Internationale du Froid - vol. 27 - n. 8
- Formats : PDF
View record